• 12000w Inverter Charger 120v/240v Split Phase w/ Transfer Switch

12000w Inverter Charger 120v/240v Split Phase w/ Transfer Switch

  • $2,900.00

  • Model#: SG-120048V-S
  • Availability: In Stock
  • Weight: 200.00lb
  • Dimensions: 30 x 12.25 x 15.25 in
The 12000w inverter of 48 volt to 120/240Volt is a pioneering low frequency inverter charger compliant to UL 1741 safety standards. This full sine wave power inverter was designed with top quality and durability in mind. This unit is built to survive more than 10 years in the harshest conditions (and has met and exceeded those expectations).
Our 12000 watt inverter is a three-in-one product: power inverter, battery charger and transfer switch. The 12000 watt inverter gives out 300% surge power of 36KW for 20 seconds to meet your household or business’s energy needs, meaning, you no longer have to oversize inverter wattage to meet high surges from loads, less initial investment.
Our full sine wave 12KW inverter works with very little power loss, outputs an average THD of 3% , its idle consumption is 180 watts, and  its peak DC to AC efficiency is notably 90% .
It will significantly outperform any other competing 12KW inverter models in terms of operating costs over the long-term as it reduces battery discharge cycles and prolongs battery life.
The built-in transfer switch allows it to automatically switch between battery bank and shore power (or generators) with a transfer time of 10 mili seconds.
If you are using a generator as backup, the auto generator starter on the full sine wave inverter will automatically start the generator when battery voltage is low enough.
It has a built-in 120 amp battery charger for using AC power from the grid or from a generator, to recharge a battery bank. This UL 1741 compliant 12KW inverter is capable of outputting 12KW at 40 degrees Celsius and withstanding thermal fluctuations because of its over-temperature protection and thermally-controlled fans.
It’s protected from humidity, airborne dust, and dirt thanks to its marine-coated boards.
This UL 1741 compliant 12000 watt inverter is split-phase, and requires a 240Vac input (single-phase 240Vac or two hot lines of 120Vac), and will output 120 or 220/230/240Vac at 50 or 60Hz. The output winding is center-tapped and the center tap connected to a grounded neutral.


Write a review

Please login or register to review